Menu
HomeElectrical ServicesHouse RewiresEV Charger InstallationConsumer Unit UpgradesOutdoor & Garden LightingCCTV InstallationCommercial ElectricalEICR / Electrical TestingShop Fit-Out ElectricsEmergency ElectricianLighting InstallationKitchen & Bathroom ElectricsFault FindingMedia Wall ElectricsOur WorkAbout UsReviewsContact
Electrical services
House RewiresEV Charger InstallationConsumer Unit UpgradesOutdoor & Garden LightingCCTV InstallationCommercial ElectricalEICR / Electrical TestingShop Fit-Out ElectricsEmergency ElectricianLighting InstallationKitchen & Bathroom ElectricsFault FindingMedia Wall Electrics
Areas covered
BearsdenMilngavieGlasgow West EndGlasgow SouthsidePaisleyClydebankGiffnock & Newton MearnsEast Kilbride Get a free quote Call 07502 547831

EV Charging

EV Charger Installation in Glasgow

An EV charge point is a continuous high load on a dedicated circuit, and the installation stands or falls on what happens before the unit goes on the wall: the load assessment, the earthing arrangement and the state of the supply.

  • Glasgow based
  • Limited company since 2022
  • Domestic & commercial
  • Fully insured
  • Testing & certification
  • Emergency call-outs available
Wall-mounted EV charge point installed by MMM Electrical on a Glasgow driveway, connected and charging an electric car
EV charge point installed, tested and charging.

EV Charger Installation — what it involves

A 7.4kW charger draws 32A for hours at a time. That means a dedicated radial circuit, the right protective device, and a proper look at the main fuse and existing demand before anything is committed to.

Earthing matters as much. Where the supply is PME, open-PEN protection or an earth rod arrangement is needed. We assess it, tell you what the property needs, and install to suit.

What we provide

  • Home charge point installation, tethered or untethered
  • Load assessment and main fuse check before any commitment
  • Dedicated RCD-protected radial circuit sized to the unit
  • Open-PEN protection or earth rod installation for PME supplies
  • Consumer unit upgrades where the existing board cannot take the circuit
  • Workplace, fleet and multi-unit installations with load management
  • Integration with solar PV and battery storage for surplus charging
  • Commissioning, app setup and full certification

Why customers call us

Common reasons for ev charger installation

  • New electric or hybrid car

    Charging at home overnight on a proper circuit costs a fraction of public rapid charging.

  • Granny lead charging

    A 3-pin lead into a domestic socket for hours is slow and hard on the socket and the circuit.

  • Workplace and fleet charging

    Staff and visitor charging, load-managed across multiple units.

  • Landlords and developments

    Charging provision at flats, factored blocks and new build.

  • Solar or battery already installed

    Chargers that divert surplus generation need the right unit and a CT clamp on the supply.

  • Future-proofing a driveway

    Cable and containment run now is far cheaper than retro-fitting later.

What you get

The difference it makes

Assessed before it is quoted

We look at the supply, the board and the earthing first. A price without that is a guess.

Cable run planned with you

Route, containment and unit position agreed on site so the finished job looks deliberate.

Set up before we leave

App, account and charging schedule configured and tested with your car where possible.

Certified

Installation certificate and test results issued, which is what your insurer will ask for.

Recent examples

Jobs like yours

  • Semi in Bearsden: 7.4kW untethered charger with open-PEN protection on a PME supply
  • Terraced house, Southside: charger with a cable run through the close to a rear parking space
  • Small business, Hamilton: two workplace chargers with load management on a shared supply
  • Detached in Newton Mearns: charger integrated with existing solar PV for surplus charging

Where we cover

Glasgow City Centre
West End
Southside
East End
Bearsden
Milngavie
Giffnock
Newton Mearns
Paisley
Renfrew
Clydebank
East Kilbride
Hamilton
Motherwell
Stirling
Falkirk

Questions

EV Charger Installation — your questions answered

How long does an EV charger installation take?

Most domestic installations are done in half a day to a day, depending on the cable run and whether the consumer unit needs work first.

Do I need my consumer unit upgraded?

Sometimes. The board needs a spare way, the right protective device and correct main earthing. We check all three at survey and tell you before quoting.

What is open-PEN protection and do I need it?

Most Glasgow supplies are PME. Where the earthing is PME, the installation needs either a charger with built-in open-PEN detection or an earth electrode arrangement. We confirm which applies to your property.

Can I charge from my solar panels?

Yes, with a charger that supports surplus charging and a CT clamp fitted at the supply. We will specify a unit that does what you want it to.

Can you install a charger at a flat without a driveway?

It depends on the parking arrangement and the permissions from the factor or owners’ association. We will look at it and be straight with you about what is possible.

Free quotes · No obligation

EV Charger Installation — get a price

Free written quote, no obligation, and a straight answer on what the job actually needs.